MAX326CPE+ Overview
This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. A switch device like this is mounted in Through Hole. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around 0°C~70°C TA extended. 16 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. An electrical component like this is included in the 16 series. Unlike digital switches, these are based on SPST - NC switching circuits. Use MAX326 to search for variants of the digital switches. A 3.5kOhm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 30V should not normally be supplied to the switches. The digital multiplexer has a low cost Dual, Single supply. There should be 10V voltage fed to the electrical part below 10V. A digital multiplexer may suffer damage if voltage is applied above 250μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. When using dual power supplies, you should attach at least 4.5V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. A Drain to Source resistance of 3.5kOhm is shown for this electronic part.
MAX326CPE+ Features
4 Channels
Switch Circuit: SPST - NC
Drain-to-Source resistance: 3.5kOhm
MAX326CPE+ Applications
There are a lot of Maxim Integrated MAX326CPE+ Analog Switches & Multiplexers ICs applications.
- PBXs
- Microwave transmission systems
- PCMCIA cards
- Digital access cross connects
- Battery Powered Systems
- Data Acquisition Systems
- HDTV
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Medical systems
- Private Branch Exchange (PBX)
