DG412LDQ Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. The electrical component body receives 16 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. There are 4 circuits in this switch device. An switch multiplexer with 17Ohm internal resistance has a value of 17Ohm. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 12V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.7V. When the digital multiplexer is charged above 1μA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 6V. It is recommended that you attach at least 3V to your dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.
DG412LDQ Features
Switch Circuit: SPST - NO
-3db Bandwidth: 280MHz
DG412LDQ Applications
There are a lot of Vishay Siliconix
DG412LDQ Analog Switches & Multiplexers ICs applications.
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
