CD74HC4051MG4 Overview
As the electronic part is packed in SOIC, international shipping is convenient. Total terminations are 16. The electronic part provides high-quality output because it has 8 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. The electrical component body receives 16 pins. An switch multiplexer with 130Ohm internal resistance has a value of 130Ohm. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2V. Despite this switch device's dual supply capability, its voltage should not exceed 5V. It is recommended that you attach at least 1V to your dual power supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. Operating the 8 inputs requires 8 inputs. There are 180MHz bandwidths for data transfer. Temperatures above 125°C degrees Celsius should not be operated by the multiplexer. A analog switch ics with 1 outputs is included.
CD74HC4051MG4 Features
8 Channels
Bandwidth: 180MHz
CD74HC4051MG4 Applications
There are a lot of Texas Instruments
CD74HC4051MG4 Analog Switches & Multiplexers ICs applications.
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
