DG721DN-T1-GE4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-UFDFN Exposed Pad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 8. High-quality output is provided by the electronic component's 1 channels. A 3V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 8 series. Multiplexers built on a SPST - NO switching circuit are built. The multiplexer consists of 2 circuits. The internal resistance of this digital multiplexer is 4.5Ohm. To find out what the 8 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Single supply type digital switch with a low cost. 1.8V is the lowest voltage the electrical component should receive. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. Putting voltage greater than 2μA on the multiplexer may cause damage. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Check out the electrical component's additional features, such as the following: VIDEO APPLICATION.
DG721DN-T1-GE4 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 366MHz
Additional Features: VIDEO APPLICATION
DG721DN-T1-GE4 Applications
There are a lot of Vishay Siliconix DG721DN-T1-GE4 Analog Switches & Multiplexers ICs applications.
- Cellular phones
- PCMCIA cards
- Industrial control systems
- Private Branch Exchange (PBX)
- Multiplexers
- Imaging
- ISDN NT1/TA
- New designs requiring multiplexer functions
- 65 V DACs
- Video signal routing
