DG3001DB-T1-E1 Overview
As the electronic part is packed in 6-MICRO FOOT®CSP, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 6. The electronic part provides high-quality output because it has 1 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. The electrical component body receives 6 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching with DG3001 to find analog multiplexer variants. An switch multiplexer with 700mOhm internal resistance has a value of 700mOhm. Datasheets for 6 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 1.8V. An operating current of 100nA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 1.8V~5.5V volts. When the digital multiplexer is charged above 1μA, damage can occur. Operating the 1 inputs requires 1 inputs.
DG3001DB-T1-E1 Features
1 Channels
Switch Circuit: SPST - NO
100nA Supply Current
DG3001DB-T1-E1 Applications
There are a lot of Vishay Siliconix
DG3001DB-T1-E1 Analog Switches & Multiplexers ICs applications.
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
