CD74HC112PWRE4 Overview
It is packaged in the way of TSSOP. D flip flop is embedded in the Tape & Reel (TR) package. D latch consists of 2 elements. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered from a supply voltage of 4.5V. This D flip flop belongs to the family of HC/UH. This electronic part is mounted in the way of Surface Mount. It is designed with 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Negative Edge. This flip flop is designed with 2 Bits. This D flip flop is well suited for TR based on its reliable performance. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 4μA of quiescent current without being affected by external factors. The high level output current is set to -5.2mA. The low level output current is set to 5.2mA. The operating temperature should be lower than 125°C. The operating temperature should be higher than -55°C. It operates with the minimal supply voltage of 2V. It supports the maximal supply voltage of 6V. The frequency that can be achieved is 60MHz. The logic IC it adopts is J-K FLIP-FLOP. It is equipped with 2 Functions . It is equipped with 16 pin count. The output current of 5.2mA makes it feature maximum design flexibility.
CD74HC112PWRE4 Features
Tape & Reel (TR) package
16 pins
2 Bits
2 Functions
16 pin count
CD74HC112PWRE4 Applications
There are a lot of Texas Instruments
CD74HC112PWRE4 Flip Flops applications.
- Digital electronics systems
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
