CD74ACT112MG4 Overview
SOICis the packaging method. A total of 2elements are present in it. A total of 16terminations have been recorded. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as ACT. There is an electronic part that is mounted in the way of Surface Mount. The 16pins are designed into the board. This device exhibits a clock edge trigger type of Negative Edge. It is designed with 2bits. Considering its reliability, this T flip flop is well suited for TUBE. A total of 5V power supplies are needed to run it. Optimal efficiency requires a supply voltage of 5V. In order for the chip to function, it has 1output lines. Quiescent current is consumed by the D latch in the amount of 4μA. A -24mAvalue is set for the high level output current. 24mA is the low level output current. A temperature below 125°Cis recommended for operation. It is recommended that the operating temperature be greater than -55°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. We are able to achieve a frequency of 100MHz. The logic IC it uses is J-K FLIP-FLOP. As a result, it is equipped with 2 functions . This device is equipped with a pin count of 16. In addition to its maximum design flexibility, the output current of the flip flop is 24mA.
CD74ACT112MG4 Features
16 pins
2 Bits
5V power supplies
2 Functions
16 pin count
CD74ACT112MG4 Applications
There are a lot of Texas Instruments
CD74ACT112MG4 Flip Flops applications.
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
