CD74HC175M96G4 Overview
The flip flop is packaged in a case of SOIC. D latch consists of 1 elements. Terminations are 16. The power source is powered by 4.5V. Electronic devices of this type belong to the HC/UHfamily. Electronic part Surface Mountis mounted in the way. With its 16pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. This D latch consumes 8μA quiescent current at all. It is set to -5.2mAfor the high level output current. It is set to 5.2mAfor the low level output current. If the operating temperature is lower than 125°C, it is recommended. It should be higher than -55°Cwhen the system is operating. Normally, it operates with a voltage of 2VV as its minimum supply voltage. It supports a maximum supply voltage of 6V volts. This frequency can be achieved 35MHz. In this case, it uses a D FLIP-FLOP logic IC. It is equipped with 1 functions . The D latch is equipped with 16 pins. As a result of its output current of 5.2mA, it is very flexible in terms of design.
CD74HC175M96G4 Features
16 pins
1 Functions
16 pin count
CD74HC175M96G4 Applications
There are a lot of Texas Instruments
CD74HC175M96G4 Flip Flops applications.
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
