CD74HC73MG4 Overview
It is packaged in the way of SOIC. A total of 2 elements are present. It has been determined that there have been 14 terminations. Power is provided by a 4.5V supply. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 14 pins. This device has the clock edge trigger type of Negative Edge. This device has the base part number FF/Latches. There are 2bits in its design. In light of its reliable performance, this T flip flop is well suited for TUBE. There are 1 output lines in this JK flip flop. 4μAquiescent current consumed. Additionally, there are MASTER SLAVE OPERATION on the electronic flip flop that can be referred to. A -5.2mAis set for the high level output current. A 5.2mAvalue is set for low-level output current. Ideally, the operating temperature should be lower than 125°C. Operating temperatures should be above -55°C. It is powered by 2V as its minimum supply voltage. There is a maximum supply voltage of 6V. The frequency can be set to 60MHz. J-K FLIP-FLOPis used as the logic IC in this D flip flop. There are 2 functions available on the JK flip flop. It is equipped with 14 pins. It offers maximum design flexibility with its output current of 5.2mA.
CD74HC73MG4 Features
14 pins
2 Bits
2 Functions
14 pin count
CD74HC73MG4 Applications
There are a lot of Texas Instruments
CD74HC73MG4 Flip Flops applications.
- Digital electronics systems
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
