CD4013BNSRG4 Overview
The package is in the form of SOP. As part of the package Tape & Reel (TR), it is embedded. The element count is 2 . 14terminations have occurred. It is powered by a voltage of 5V . It is mounted in the way of Surface Mount. There are 14pins on it. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. An electronic part with 1bits has been designed. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. There are no output lines on the JK flip flop. 1input lines are available for you to choose from. There is 20μA quiescent current consumption by it. A high level output current of -4.2mAis set. In the low level output current setting, the current is set to 6.8mA. Ideally, the operating temperature should be below 125°C. If the operating temperature is higher than -55°C, the system should operate properly. In order for it to operate, a supply voltage of 3Vis required. A maximum voltage of 18V can be provided by it. This frequency can be achieved at 24MHz. There is a logic IC D FLIP-FLOP used in the D flip flop. It has 2 functions. 14pins are available on this JK flip flop.
CD4013BNSRG4 Features
Tape & Reel (TR) package
14 pins
1 Bits
2 Functions
14 pin count
CD4013BNSRG4 Applications
There are a lot of Texas Instruments
CD4013BNSRG4 Flip Flops applications.
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
