74ACT11374DW Overview
The flip flop is packaged in 24-SOIC (0.295, 7.50mm Width). Package Tubeembeds it. In the configuration, Tri-State, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74ACTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 70MHz. D latch consists of 1 elements. 24terminations have occurred. JK flip flop belongs to 74ACT11374 family. A voltage of 5V is used as the power supply for this D latch. A JK flip flop with a 4pFfarad input capacitance is used here. In this case, the D flip flop belongs to the ACTfamily. It is mounted in the way of Surface Mount. The 24pins are designed into the board. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. The flip flop is designed with 8bits. The superior flexibility of this product is achieved by using 8 circuits. A power supply of 5Vis required to operate it. The flip flop contains 2ports. If high efficiency is desired, the supply voltage should be kept at 5V. With a current output of 24mA , it offers maximum design flexibility. There are 3 output lines on it. It consumes 8μA current.
74ACT11374DW Features
Tube package
74ACT series
24 pins
8 Bits
5V power supplies
74ACT11374DW Applications
There are a lot of Texas Instruments 74ACT11374DW Flip Flops applications.
- Counters
- ESD protection
- Computing
- Modulo – n – counter
- Convert a momentary switch to a toggle switch
- Frequency Dividers
- EMI reduction circuitry
- Matched Rise and Fall
- Test & Measurement
- Single Up Count-Control Line
