Name: STG3690QTR
Brand: STMicroelectronics
SKU: STG3690QTR
Availability: InStock

new-10%

STG3690QTR

Manufacturer part number:STG3690QTR

Manufacturer:STMicroelectronics

Description:50ns, 30ns SPDT 1.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE STG3690 16 Pins 10nA 3V 16-VFQFN Exposed Pad

Case Package:SOT-23

Datasheet:STG3690QTR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-VFQFN Exposed Pad
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	1.5Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.12W
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	0.5mm
Reach Compliance Code	unknown
Base Part Number	STG3690
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Power Supplies	1.8/3.3V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	3.6V
Min Supply Voltage	1.65V
Operating Supply Current	50nA
Max Supply Current	50nA
Turn On Delay Time	70 ns
Supply Type	Single
Turn-Off Delay Time	45 ns
-3db Bandwidth	50MHz
On-State Resistance (Max)	1.5Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	0.06Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	50ns, 30ns
Charge Injection	35pC
Channel-to-Channel Matching (ΔRon)	60m Ω
Crosstalk	-54dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~3.6V
Normal Position	NO/NC
Height Seated (Max)	1mm
Length	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

STG3690QTR Product Details

STG3690QTR Overview

Presented in 16-VFQFN Exposed Pad, this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -55°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. As part of its design, the 16 series is equipped with this electronic component. Unlike digital switches, these are based on SPDT switching circuits. There are 4 circuits in this switch device. Search with STG3690 if you are looking for analog multiplexer variants. Analog switches have 1.5Ohm internal resistance. Please refer to the datasheets for 16 pins functions. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. It is recommended to use 1.65V as the lowest voltage for the electrical part. An operating current of 50nA would be sufficient for this switch device. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~3.6V. The switch multiplexer may be damaged if it is exposed to voltage greater than 50nA. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.