Name: ADG707BRU
Brand: Hotenda
SKU: ADG707BRU
Availability: InStock

new-10%

ADG707BRU

Manufacturer part number:ADG707BRU

Manufacturer:Hotenda

Description:32ns, 16ns (Typ) 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG707 28 Pins 100pA 2.5V 28-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG707BRU Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Contact Plating	Lead, Tin
Mounting Type	Surface Mount
Package / Case	28-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	4.5Ohm
Additional Feature	CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG707
Pin Count	28
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Power Supplies	3/5/+-3V
Number of Channels	8
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	1nA
Power Dissipation	5μW
Max Supply Current	1μA
Propagation Delay	40 ns
Turn On Delay Time	40 ns
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Bandwidth	36MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	10 ns
On-State Resistance (Max)	4.5Ohm
High Level Output Current	30mA
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	13pF 90pF
On-state Resistance Match-Nom	0.3Ohm
Switch Time (Ton, Toff) (Max)	32ns, 16ns (Typ)
Charge Injection	8pC
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	50ns
Signal Current-Max	0.03A
Height	1.05mm
Length	9.7mm
Width	4.4mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG707BRU Product Details

ADG707BRU Overview

Due to its 28-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 8:1. Extended operating temperature around -40°C~85°C TA. There are 28 terminations totally. The electronic part provides high-quality output because it has 8 channels. It is safe to turn on and run the electronic component with a 2.5V voltage supply. The electronic part body is injected with 28 pins. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with ADG707. There is 4.5Ohm internal resistance in this digital multiplexer. Datasheets for functions of 28 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. 1.8V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 1nA current would suffice. A voltage higher than 1μA may cause damage to the switch multiplexer. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. Operating voltages of 5V are compatible with the electrical part. It is possible to operate 16 inputs. In 36MHz-bandwidths, data can be transferred. This electrical component also includes additional features such as CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES.