SN74HC175DG4 Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. You can find it in the Tubepackage. Currently, the output is configured to use Differential. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. Powered by a 2V~6Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 60MHz. In total, it contains 1 elements. T flip flop consumes 8μA quiescent energy. There are 16 terminations,The 74HC175family includes it. It is powered from a supply voltage of 5V. This T flip flop has a capacitance of 3pF farads at the input. This D flip flop belongs to the family of HC/UH. This electronic part is mounted in the way of Surface Mount. It is designed with 16 pins. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. There are 4bits in this flip flop. In this case, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. The power supply is 2/6V. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With an output current of 5.2mA, it is possible to design the device in any way you want. As of now, there are 4input lines.
SN74HC175DG4 Features
Tube package
74HC series
16 pins
4 Bits
2/6V power supplies
SN74HC175DG4 Applications
There are a lot of Texas Instruments SN74HC175DG4 Flip Flops applications.
- Memory
- Computers
- ESD performance
- Clock pulse
- Buffered Clock
- High Performance Logic for test systems
- Divide a clock signal by 2 or 4
- Frequency division
- Automotive
- Storage registers
