SI5350A-B01843-GT Overview
Tube-method packaging is used for clock ICs. This clock generator is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. 10 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. It would be possible to supply this clock PLL with 1.89V of power. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. Clock PLL synthesi200MHzes a high-quality 200MHz clock output frequency. If the ambient temperature is below -40°C, the clock PLL may not start up. This clock PLL features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.
SI5350A-B01843-GT Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B01843-GT Applications
There are a lot of Silicon Labs SI5350A-B01843-GT Clock Generators applications.
- Cell phones
- Frequency shifting decodes
- Fiber Channel
- Test equipment
- Phase modulation cellular systems
- PMR (Professional Mobile Radio)
- Carrier synchronization in wired communication
- Microprocessor clock multipliers
- VSAT (Small Ground Satellite Station)
- Wireless handsets
