SI5345B-D10235-GMR Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result, frequency synthesizers can be found to contain 64 terminations. For this clock generator ic, a voltage of 1.8V is required. It would take a maximum supply voltage of 1.89V to operate this time clock generator. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. The clock generator ic can synthesi350MHze a high-quality clock output frequency of 350MHz. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C.
SI5345B-D10235-GMR Features
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5345B-D10235-GMR Applications
There are a lot of Silicon Labs SI5345B-D10235-GMR Clock Generators applications.
- High-frequency induction heating
- Cellular/4G
- Vector network analyzers (VNA)
- Multiplexing communication
- Clock recovery
- Picocells, femtocells and small cells
- Closed circuit systems
- Pagers
- Wi-Fi routers
- High-speed optical transport network (OTN)
