SI5344B-D10927-GMR Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. As part of the 44-VFQFN Exposed Pad package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. 44 terminations can be found in frequency generators. The clock generator ic should be grounded with a voltage of 1.8V. There is a Clock PLL called CML, LVCMOS, LVDS, LVPECL, Crystal which is designed to be the input to this clock generator. To access the full performance of the electronic component, 1 circuits are implemented. An up to 350MHz frequency is provided by this clock-based RF synthesizer. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock generators should operate with the voltage supply of 1.71V~1.89V 3.14V~3.47V. Based on test statistics, ambient temperature should be set at -40°C~85°C TA. There are several logic levels in CML, HCSL, LVCMOS, LVDS, LVPECL logic that can be used with this clock generator. Clock Multiplier, Jitter Attenuator is the type of electrical part that this component is classified as.
SI5344B-D10927-GMR Features
Available in the 44-VFQFN Exposed Pad
Supply voltage of 1.8V
SI5344B-D10927-GMR Applications
There are a lot of Silicon Labs SI5344B-D10927-GMR Clock Generators applications.
- Clock recovery
- Ports
- Cable television converter boxes
- Test equipment
- Coherent carrier tracking
- Simple clock clean-up circuits
- Local oscillator source in receiver
- Microwave radio
- Signal modulation and demodulation
- Peripheral devices
