SI5335D-B06776-GMR Overview
Clock ICs are packaged using the Tape & Reel (TR) method. A Clock PLL is included with the 24-VFQFN Exposed Pad package. This clock generator will sustain a maximum temperature of 260 when reflown. As you can see, it consists of 24 terminations. Basically, this time clock generator needs a voltage of 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock generators can take up to 1.98V of power as a maximum supply voltageThere are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. The supply voltage (Vsup) should be kept above 1.71V for normal operation. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335D-B06776-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B06776-GMR Applications
There are a lot of Silicon Labs SI5335D-B06776-GMR Clock Generators applications.
- Jitter reduction
- Carrier synchronization in wired communication
- Picocells, femtocells and small cells
- Ports
- Modems
- Automatic control
- Antenna automatic tracking
- Automatic control system test
- Pulsed digital systems
- Clock generation systems
