SI5335D-B06008-GM Overview
Clock ICs are packaged using the Tray method. As part of the 24-VFQFN Exposed Pad package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. It contains a total of 24 terminations within RF synthesizer. This electronic frequency generator requires a voltage of 1.8V. The Surface Mount allows this electrical component to be easily installed on the panel. The maximal supply voltage this clock generator would take is 1.98V. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. If the frequency generator's operating temperature exceeds 85°C, it may pose a ha85°Card. With this clock-generating device, a high-quality clock output frequency of 200MHz can be produced. If the ambient temperature is below -40°C, the frequency generator may not start. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY can also be founded when using frequency generators.
SI5335D-B06008-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B06008-GM Applications
There are a lot of Silicon Labs SI5335D-B06008-GM Clock Generators applications.
- Mobile telephones
- Mechanical devices
- Deep space exploration
- Small signal recovery
- Clock synchronization
- Frequency synthesis
- Microwave backhaul IF
- Televisions
- Coherent detection of the signal
- Carrier synchronization in wired communication
