SI5335C-B07525-GM Overview
As a clock IC, PLLs is packaged using the Tray method. There is a clock generator embedded in the 24-VFQFN Exposed Pad package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. In it, there are 24 terminations to be found. The supply voltage of 1.8V allows for high efficiency. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. The maximum voltage this clock PLL can handle is 1.98V. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. Whenever the frequency generators's operating temperature exceeds 85°C, ha85°Cards may occur. With this clock-generating device, 350MHz of high-quality clock output frequency can be generated. This frequency generator may fail to start up if the ambient temp is lower than -40°C. This clock PLL features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.
SI5335C-B07525-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335C-B07525-GM Applications
There are a lot of Silicon Labs SI5335C-B07525-GM Clock Generators applications.
- Mobile telephones
- Clock generation systems
- Clock signals to the high-speed Digital RF circuits
- Clock synchronization
- Signal demodulation
- FPGA and processor clocks
- FMCW Radar
- Picocells, femtocells and small cells
- Deep space exploration
- Integrated phase noise in aerospace systems
