CY2304SI-1 Overview
Tube-method packaging is used for clock ICs. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 220. 8 terminations can be found in frequency synthesizer. To operate this time clock generator, 3.3V voltage should be applied. This Clock PLL will be fed by Clock as its input. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 133.3MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would be possible to supply this clock PLL with 3.6V of power. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. As far as this electronic part is concerned, it can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. In this IC, a 8-bit frequency generator is designed specifically for use in microprocessors. Low timing skew is provided by this analog clock generator at maximum 0.2 ns. There are 4 pins that are configured to enable high true output on this analog clock generator. When searching for parts of the 2304 family, similar electronic components will be found.
CY2304SI-1 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
4 true outputs
CY2304SI-1 Applications
There are a lot of Rochester Electronics, LLC CY2304SI-1 Clock Generators applications.
- Multi-function printers
- Carrier synchronization in wired communication
- Frequency synthesis
- Reference signals to RF systems
- Frequency shifting decodes
- Picocells, femtocells and small cells
- MRI
- Peripheral devices
- Set-top boxes
- Satellite navigation communication
