SI5335B-B06837-GMR Overview
Tape & Reel (TR)-method packaging is used for clock ICs. 24-VFQFN Exposed Pad contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. There are a total of 24 terminations in this file. This time clock generator should be voltaged at 1.8V. Surface Mount-slots make it easy to mount this electronic component on panels. 1.98V would be the maximum supply voltage for this clock generator. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. Clock PLL synthesi200MHzes a high-quality 200MHz clock output frequency. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY can also be founded when using frequency generators.
SI5335B-B06837-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335B-B06837-GMR Applications
There are a lot of Silicon Labs SI5335B-B06837-GMR Clock Generators applications.
- PCI express cards
- FSK demodulators
- Ultrasound diagnosis
- Digital circuits
- Simple clock clean-up circuits
- Coherent carrier tracking
- Jitter reduction
- Small signal recovery
- Clock recovery
- Wide area power system
