SI5335B-B06474-GMR Overview
The Tape & Reel (TR) method is used for packaging clock ICs. 24-VFQFN Exposed Pad contains this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As you can see, it consists of 24 terminations. Clock generator ics require a voltage of 1.8V. The Surface Mount allows this electrical component to be easily installed on the panel. The maximal supply voltage this clock generator would take is 1.98V. Incorporating CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs, this RF synthesizer features CLOCK GENERATOR, PROCESSOR SPECIFIC. In order to maintain safety, this frequency generator should be supplied with voltages above 1.71V. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. The clock PLL can synthesi200MHze a clock frequency of 200MHz with high quality. A clock PLL that starts up at a lower temperature may not function. With ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY, this clock generator produces better clock signals.
SI5335B-B06474-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335B-B06474-GMR Applications
There are a lot of Silicon Labs SI5335B-B06474-GMR Clock Generators applications.
- Digital logic circuits
- Coherent detection of the signal
- Automatic test equipment
- Clock recovery
- Local oscillators (LOs)
- MRI
- Radiotelephones
- Space communucation
- Frequency Modulation (FM) stereo decoders
- Closed circuit systems
