SI5335B-B02357-GMR Overview
The Tape & Reel (TR) method is used for packaging clock ICs. There is a clock generator embedded in the 24-VFQFN Exposed Pad package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 24 terminations that can be found in frequency synthesizer. Clock generator ics require a voltage of 1.8V. The Surface Mount allows this electrical component to be easily installed on the panel. This clock generator would require a maximum supply voltage of 1.98V. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. A frequency generator that runs over 85°C may cause ha85°Cards. In this clock-generating clock generator ic, a frequency of 200MHz is synthesi200MHzed for high-quality output. A temperature of less than -40°C may cause this clock PLL to fail to start. The RF synthesizer features ALSO OPERATES WITH 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output.
SI5335B-B02357-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335B-B02357-GMR Applications
There are a lot of Silicon Labs SI5335B-B02357-GMR Clock Generators applications.
- Ports
- Clock synchronization
- Satellite receivers
- CB radios
- FM demodulation networks for FM operations
- Modems
- Microwave radio
- Radio receivers
- Communication infrastructure
- Motor speed controls
