DS1090U-1+ Overview
Clock ICs are packaged using the Tube method. In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 8 terminations in this file. In this case, Clock is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There are 3V~5.5V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in CMOS, TTL logic that can be used with this clock generator. It is possible to classify this electronic component as a Clock Generator. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. The related electrical components for the base part number DS1090 can be found below. A 8 pin is available on the clock PLL. It is part of the EconOscillator™ series of electronic components. By operating at a frequency of 8MHz, frequency generator is able to achieve high efficiency. Depending on the load capacitance, the analog clock generator can deliver a value of 30pF.
DS1090U-1+ Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Load capacitance of 30pF
DS1090U-1+ Applications
There are a lot of Maxim Integrated
DS1090U-1+ Clock Generators applications.
- Wide area power system
- Digital circuits
- Wireless base station for LTE, LTE-advanced
- Picocells, femtocells and small cells
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
- Fiber Channel
