SI5335A-B04403-GM Overview
It is packaged using the Tray method since it is a clock IC. Clock PLL is embedded in the 24-VFQFN Exposed Pad package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. There are 24 terminations found in the file. For this clock generator ic, a voltage of 1.8V is required. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock PLL is capable of receiving a maximum of 1.98V as a supply voltage. Incorporating CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs, this RF synthesizer features CLOCK GENERATOR, PROCESSOR SPECIFIC. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. With this clock-generating device, 350MHz of high-quality clock output frequency can be generated. This frequency generator may fail to start up if the ambient temp is lower than -40°C. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.
SI5335A-B04403-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B04403-GM Applications
There are a lot of Silicon Labs SI5335A-B04403-GM Clock Generators applications.
- Signal modulation and demodulation
- PMR (Professional Mobile Radio)
- Local oscillator source in receiver
- Electronic equipment
- Frequency shifting decodes
- Electronic countermeasures
- Clock synchronization
- Antenna automatic tracking
- Wireless infrastructure
- Digital logic circuits
