BU4325F-TR Overview
There are 4 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SC-82 functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The supervisor is always powered by a 2.4V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 4 pins on the board. This power management system has 82 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 700mV. Voltage (Vsup) shouldn't exceed 7V volts in this PMIC. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. A similar IC managements number of the manufacturer can always be found by using BU43*, the base power ics number. The maximum supply temperature that PMIC chip can work with is 1.75μA.
BU4325F-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4325F-TR Applications
There are a lot of ROHM Semiconductor BU4325F-TR Voltage Supervisors applications.
- Radar
- Embedded computing
- Precision measurement
- Power distribution systems of CCU
- Fire equipment power monitoring system
- Radio
- Sensitive sensors
- Military communications
- Important electronics for automotive safety
- Automotive permanent magnet synchronous motors
