MAX709MCPA+ Overview
Power management is mounted through 8 terminals. In terms of packaging, power management follows the Tube model. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 5V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. In total, it has 8 pins on IC management. Pin count of the power management is 8. Mounting type Through Hole is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. In addition, IC management are other features such as [0], to mention only a few. A similar IC managements number of the manufacturer can always be found by using MAX709, the base power ics number.
MAX709MCPA+ Features
Simple Reset/Power-On Reset type
MAX709MCPA+ Applications
There are a lot of Maxim Integrated MAX709MCPA+ Voltage Supervisors applications.
- Computer applications
- Smart meter
- Electronics installed in the vehicle
- Dash board
- Urban rail transit weak current power monitoring
- Detection of phase loss
- Important electronics for automotive safety
- Important electronics for automotive protection
- Embedded computing
- Satellite navigation
