MAX800LCUE+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Packaging is in the form of a Tube. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 16-TSSOP (0.173, 4.40mm Width) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. The supervisor is always powered by a 4.75V volt supply. Power management conducts at a voltage of 1. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 16 pins. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: 0°C~70°C TA. The output voltage of this power managment ic during operation is Open Drain, Push-Pull. A similar IC managements number of the manufacturer can always be found by using MAX800, the base power ics number. There is a requirement for 5V power to power this power management.
MAX800LCUE+ Features
Battery Backup Circuit type
MAX800LCUE+ Applications
There are a lot of Maxim Integrated MAX800LCUE+ Voltage Supervisors applications.
- Refrigeration
- Medical-specific insulation monitor
- Radar
- Network equipment
- Detection of phase sequence
- Detection of phase loss
- DVR
- Smartphones
- Battery-powered equipment
- Functional modules
