Name: BU4066BCF-E2
Brand: ROHM Semiconductor
SKU: BU4066BCF-E2
Price: 0.99000 USD
Availability: InStock

new-10%

BU4066BCF-E2

Manufacturer part number:BU4066BCF-E2

Manufacturer:ROHM Semiconductor

Description:SPST - NO 280Ohm DUAL Analog Switches BU4066 14 Pins 300nA 5V 14-SOIC (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:BU4066BCF-E2 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e2
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	280Ohm
Terminal Finish	TIN COPPER
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.18W
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	10
Base Part Number	BU4066
Output	SEPARATE OUTPUT
Pin Count	14
Polarity	Non-Inverting
Power Supplies	5/15V
Number of Channels	4
Max Supply Voltage	18V
Min Supply Voltage	3V
Operating Supply Current	4μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	140 ns
Supply Type	Single
Turn-Off Delay Time	140 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	280Ohm
Min Dual Supply Voltage	1.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	300nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	25Ohm
Switch Circuit	SPST - NO
Crosstalk	-50dB @ 1MHz
Voltage - Supply, Single (V+)	3V~18V
Normal Position	NO
Height Seated (Max)	1.6mm
Length	8.7mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

BU4066BCF-E2 Product Details

BU4066BCF-E2 Overview

Shipping overseas is convenient due to the electrical component's packing in 14-SOIC (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 14. A 4 channel electronic part produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A key feature of the 14 series is the inclusion of this electronic part as part of its design. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Search with BU4066 if you are looking for analog multiplexer variants. A 280Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 14 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 18V to the switch device in normal circumstances. Single supply type digital switch with a low cost. There should be 3V voltage fed to the electrical part below 3V. The analogue multiplexer could operate on 4μA current. Using a single voltage supply, this switch device consumes 3V~18V volts. Putting voltage greater than 1μA on the multiplexer may cause damage. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 9V. The voltage should be at least 1.5V if you are using dual power supplies. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.