Name: MC74VHC1G66DTT1G
Brand: ON Semiconductor
SKU: MC74VHC1G66DTT1G
Price: 0.41000 USD
Availability: InStock

new-10%

MC74VHC1G66DTT1G

Manufacturer part number:MC74VHC1G66DTT1G

Manufacturer:ON Semiconductor

Description:SPST - NO 40Ohm DUAL Analog Switches MAKE-BEFORE-BREAK MC74VHC1G66 5 Pins 100nA 3V SOT-23-5 Thin, TSOT-23-5

Case Package:SOT-23

Datasheet:MC74VHC1G66DTT1G Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	15 Weeks
Lifecycle Status	ACTIVE (Last Updated: 21 hours ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	SOT-23-5 Thin, TSOT-23-5
Surface Mount	YES
Number of Pins	5
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2007
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
Resistance	100Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	200mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC74VHC1G66
Pin Count	5
Operating Supply Voltage	5V
Polarity	Non-Inverting
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	25mA
Power Dissipation	200mW
Max Supply Current	25mA
Throw Configuration	SPST
Turn On Delay Time	40 ns
Number of Inputs	1
Halogen Free	Halogen Free
Supply Type	Single
Bandwidth	180MHz
Turn-Off Delay Time	40 ns
On-State Resistance (Max)	40Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
Switch Circuit	SPST - NO
Switching	MAKE-BEFORE-BREAK
Voltage - Supply, Single (V+)	2V~5.5V
Normal Position	NO
Height	1mm
Length	3mm
Width	1.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MC74VHC1G66DTT1G Product Details

MC74VHC1G66DTT1G Overview

The electronic component is convenient to ship overseas because it is packed in a SOT-23-5 Thin, TSOT-23-5. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -55°C~125°C TA. The total number of terminations is 5. As a result of its 1 channels, this electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. A total of 5 pins are injected into the body of the electronic part. Based on SPST - NO switching circuits, these analog multiplexers work. Use MC74VHC1G66 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 100Ohm. Datasheets for functions of 5 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 2V should be applied to the electronic component. This multiplexer would work with 1μA current. Using only a single voltage supply, this analog switch requires 2V~5.5V voltage. If you put voltage higher than 25mA on the digital multiplexer, damage may occur. A voltage of 5V can be used to operate the electronic component. A 1 input needs to be operated. There are various bandwidths available for data transfer.