ADF4110BRU-REEL Overview
The Tape & Reel (TR) method is used for packaging clock ICs. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain a maximum temperature of 240 during reflowing. In it, there are 16 terminations to be found. This time clock generator should be voltaged at 3V. In this clock generator, CMOS, TTL is used as the input to the clock. It is possible to access the full performance of the electrical part by implementing 1 circuits. The frequency generator has a maximum frequency of 550MHz. PLL clock is mounted in the way of Surface Mount. Clock generators can take up to 5.5V of power as a maximum supply voltageThis frequency synthesizer requires a supply voltage above 2.7V to be safe. In terms of supply voltage, RF synthesizer works with 2.7V~5.5V. Based on test statistics, ambient temperature should be set at -40°C~85°C. It's compatible with Clock logic levels. It has been classified as a Clock/Frequency Synthesizer (RF) electronic part, which means that it is a semiconductor. Microprocessor-specific clock PLL with 16 bits. There is a 6-BIT SWALLOW COUNTER feature on this frequency generator in order to produce a better clock signal.
ADF4110BRU-REEL Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
ADF4110BRU-REEL Applications
There are a lot of Rochester Electronics, LLC ADF4110BRU-REEL Clock Generators applications.
- Digital switching systems
- Signal demodulation
- CPUs
- Pagers
- Fiber Channel
- Frequency synthesis
- Tracking filters
- Medical equipment
- VSAT (Small Ground Satellite Station)
- Line cards used in telephone exchange
