NCP300HSN27T1 Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SOT-23-5 Thin, TSOT-23-5 functions for your convenience. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 240 for the package during reflow. In a 1.5V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. 5 pins are present in total in this power management. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 500nA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using NCP300, the base power ics number.
NCP300HSN27T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300HSN27T1 Applications
There are a lot of ON Semiconductor NCP300HSN27T1 Voltage Supervisors applications.
- WiFi router
- Analog circuit
- Detection of phase sequence
- Set top box
- Network equipment
- Detection of phase loss
- Telecommunications equipment
- DVR
- Power communication system
- DSP
