MAX6463UK30+T Overview
This power management consists of 5 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During operation, the power ic is supplied with a voltage of 3.6V. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. Taking into account all of the pins, this power management has a total of 5. 5 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~125°C TA . During operation, this power management system outputs Open Drain or Open Collector. There is a supply current of 3.5μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6463, which is the base power ics number. Voltage supervisor can work with a supply temperature of 3.5μA at the most.
MAX6463UK30+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
3.5μA operating supply current
MAX6463UK30+T Applications
There are a lot of Maxim Integrated MAX6463UK30+T Voltage Supervisors applications.
- Detection of phase imbalance
- Low voltage/high power - AI, GPU
- Detection of phase sequence
- Power distribution systems of CCU
- WiFi router
- Battery cars
- Power distribution systems of operating room
- Display equipment
- FPGA design
- Magnetic resonance imaging
