Name: MAX6301EPA
Brand: Maxim Integrated
SKU: MAX6301EPA
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2006
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Additional Feature	ADJUSTABLE WATCHDOG TIMEOUT, OPEN-DRAIN OUTPUT
Subcategory	Power Management Circuits
Max Power Dissipation	727mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	245
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	MAX6301
Output	Open Drain or Open Collector
Pin Count	8
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.2V
Operating Supply Current	4μA
Adjustable Threshold	YES
Watchdog Timer	Yes
Reset	Active Low
Voltage - Threshold	Adjustable/Selectable
Number of Voltages Monitored	1
Reset Timeout	2.8ms Minimum
Supply Current-Max (Isup)	0.007mA
Height Seated (Max)	4.572mm
Length	9.375mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX6301EPA Product Details

MAX6301EPA Overview

Power management is mounted through 8 terminals. In terms of packaging, power management follows the Tube model. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 245 for the package during reflow. When 5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. By Through Hole, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 8 pins on IC management. Power managment ic pin count is 8. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Through Hole is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. It is estimated that the voltage supervisor's supply current is 4μA. Additionally, IC management are a variety of features, for example [0], to name a few. A similar IC managements number of the manufacturer can always be found by using MAX6301, the base power ics number.