MC74AC377DTR2 Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. There is a Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at 2V~6Vvolts. In the operating environment, the temperature is -40°C~85°C TA. D-Typeis the type of this D latch. It is a type of FPGA belonging to the 74AC series. It should not exceed 140MHzin terms of its output frequency. D latch consists of 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. 20terminations have occurred. It is a member of the 74AC377 family. The power supply voltage is 5V. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of AC. There is an electronic component mounted in the way of Surface Mount. There are 20pins on it. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 8bits in its design. As soon as 6Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be maintained above 2V for normal operation. The superior flexibility of this circuit is achieved by using 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. An electrical current of 3.3/5V volts is applied to it.
MC74AC377DTR2 Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
3.3/5V power supplies
MC74AC377DTR2 Applications
There are a lot of ON Semiconductor MC74AC377DTR2 Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Dynamic threshold performance
- ESD performance
- Clock pulse
- Frequency Divider circuits
- Common Clocks
- Computing
- Event Detectors
- Data Synchronizers
- Latch
