MC74AC374DWG Overview
It is embeded in SOIC case. The Tubepackage contains it. A total of 1elements are present in it. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Power is provided by a 5V supply. Devices in the ACfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. 20pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. The design is based on 8bits. The superior flexibility of this circuit is achieved by using 8 circuits. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. For high efficiency, the supply voltage should be set to 5V. There are 3 output lines in this JK flip flop. -24mAis set as the high level output current. 24mA is the low level output current. It is recommended that the operating temperature be lower than 85°C. A temperature above -40°Cshould be used for the operation. The minimum voltage required for operation is 2V. It supports the maximal supply voltage of 6V. The frequency can be set to 155MHz. BUS DRIVERis used as the logic IC in this D flip flop. Currently, it is equipped with 1 functions . It is equipped with 20 pin count.
MC74AC374DWG Features
Tube package
20 pins
8 Bits
1 Functions
20 pin count
MC74AC374DWG Applications
There are a lot of ON Semiconductor MC74AC374DWG Flip Flops applications.
- Event Detectors
- Cold spare funcion
- Set-reset capability
- Supports Live Insertion
- Common Clocks
- Power down protection
- Clock pulse
- High Performance Logic for test systems
- ESD protection
- Functionally equivalent to the MC10/100EL29
