SN74LVC112AD Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. Package Tubeembeds it. The output it is configured with uses Differential. It is configured with a trigger that uses a value of Negative Edge. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. It is operating at -40°C~85°C TA. This electronic flip flop is of type JK Type. In FPGA terms, D flip flop is a type of 74LVCseries FPGA. There should be no greater frequency than 150MHzon its output. It consumes 10μA of quiescent In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74LVC112 family. A voltage of 1.8V is used to power it. This T flip flop has a capacitance of 4.5pF farads at the input. Devices in the LVC/LCX/Zfamily are electronic devices. In this case, the electronic component is mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device has the clock edge trigger type of Negative Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Normally, the supply voltage (Vsup) should be above 2V. The superior flexibility of this circuit is achieved by using 2 circuits. The 24mA output current allows it to be designed with the greatest amount of flexibility. Currently, there are 3 input lines present.
SN74LVC112AD Features
Tube package
74LVC series
16 pins
SN74LVC112AD Applications
There are a lot of Texas Instruments SN74LVC112AD Flip Flops applications.
- Latch-up performance
- Memory
- Differential Individual
- Counters
- Cold spare funcion
- Event Detectors
- Synchronous counter
- Clock pulse
- ATE
- High Performance Logic for test systems
