MC100EP451FAR2G Overview
It is embeded in 32-LQFP case. D flip flop is embedded in the Tape & Reel (TR) package. This output is configured with Differential. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. A voltage of -3V~-5.5Vis used as the supply voltage. Temperature is set to -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 100EP series. It should not exceed 3GHzin terms of its output frequency. In total, it contains 1 elements. It consumes 135mA of quiescent current without being affected by external factors. It has been determined that there have been 32 terminations. If you search by 100EP451, you will find similar parts. Power is provided by a 3.3V supply. It is mounted in the way of Surface Mount. This board is designed with 32pins on it. It has a clock edge trigger type of Positive Edge. There is a base part number Shift Registersfor the RS flip flops. An electronic part with 6bits has been designed. There is a 5.5Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 3V for normal operation. The system runs on a power supply of -4.5V watts. Currently, there are 6 input lines present. In addition, you can refer to the additinal NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V of the D latch. In this case, the high level output current is set to -50mA. Low level output current is set to 50mA.
MC100EP451FAR2G Features
Tape & Reel (TR) package
100EP series
32 pins
6 Bits
-4.5V power supplies
MC100EP451FAR2G Applications
There are a lot of ON Semiconductor MC100EP451FAR2G Flip Flops applications.
- Computers
- Load Control
- Test & Measurement
- Clock pulse
- Modulo – n – counter
- Counters
- High Performance Logic for test systems
- Buffered Clock
- Automotive
- Matched Rise and Fall
