74LCX16374TTR Overview
In the form of 48-TFSOP (0.240, 6.10mm Width), it has been packaged. Package Tape & Reel (TR)embeds it. There is a Tri-State, Non-Invertedoutput configured with it. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~3.6V volts. It is operating at a temperature of -55°C~125°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74LCX series. Its output frequency should not exceed 150MHz Hz. The element count is 2 . As a result, it consumes 20μA of quiescent current without being affected by external factors. In 48terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74LCX16374family make up this object. It is powered from a supply voltage of 2.7V. A 7pFfarad input capacitance is provided by this T flip flop. The electronic device belongs to the LVC/LCX/Zfamily. Surface Mount mounts this electronic component. 48pins are included in its design. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. It is designed with 16bits. For normal operation, the supply voltage (Vsup) should be above 2V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 2ports are embedded in the D flip flop. It is reported that there are 3 input lines.
74LCX16374TTR Features
Tape & Reel (TR) package
74LCX series
48 pins
16 Bits
74LCX16374TTR Applications
There are a lot of STMicroelectronics 74LCX16374TTR Flip Flops applications.
- Synchronous counter
- Communications
- Dynamic threshold performance
- Cold spare funcion
- Power down protection
- EMI reduction circuitry
- Buffer registers
- Differential Individual
- Asynchronous counter
- Event Detectors
