74LVC1G79GX,125 Overview
In the form of 4-XFDFN Exposed Pad, it has been packaged. You can find it in the Tape & Reel (TR)package. This output is configured with Non-Inverted. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 1.65V~5.5V volts, it operates. In the operating environment, the temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. This D flip flop should not have a frequency greater than 500MHz. There are 1 elements in it. During its operation, it consumes 500μA quiescent energy. A total of 5 terminations have been made. If you search by 74LVC1G79, you will find similar parts. The power source is powered by 3.3V. There is 5pF input capacitance for this T flip flop. This D flip flop belongs to the family of LVC/LCX/Z. The electronic part is mounted in the way of Surface Mount. 5pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. 1bits are used in its design. 200μAquiescent current consumed.
74LVC1G79GX,125 Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
74LVC1G79GX,125 Applications
There are a lot of Nexperia USA Inc. 74LVC1G79GX,125 Flip Flops applications.
- Counters
- Bounce elimination switch
- Control circuits
- Individual Asynchronous Resets
- Differential Individual
- Dynamic threshold performance
- 2 – Bit synchronous counter
- Count Modes
- Consumer
- Storage Registers
