FST3125MTCX Overview
For the purpose of saving board space, digital switch is included in the 14-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Among its basic configurations are 14 terminations.There is a base part number 3125 that can be used to locate signal switch's related components as well.The voltage supplied for multiplexer's system is 5V.multiplexer's systemAs a result, GULL WING represents the end of the conductors.This supply type employs Single.Currently, it is configured with 14 pins.The mounting point is Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.Signal multiplexer provides 1 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.Normally, 5V is powered by a battery.This is a signal switch that is categorized as Bus Driver/Transceivers.Not being affected by the external factors, consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 governs its operation.As far as the resistance is concerned, it operates with 7Ohm.A configuration element for the mux switch consists of 4 elements.
FST3125MTCX Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
FST3125MTCX Applications
There are a lot of ON Semiconductor FST3125MTCX Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- Combinational circuit
- HDMI applications
- Electronic circuits
- Solenoid cooling fan
- Automatic health monitoring systems
- Used to connect a single source to multiple destinations
- Microprocessor input/output systems
- Transmission from the computer system of a satellite
- Speed control of medern motors
