CAT853JTBI-T3 Overview
It is mounted through 3 terminals on the power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During operation, the power ic is supplied with a voltage of 3.3V. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. A total of 3 pins are located on this power management. 3 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In addition, IC management are other features such as [0], to mention only a few. At most, voltage supervisor can operate at a supply temperature of 15μA.
CAT853JTBI-T3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
CAT853JTBI-T3 Applications
There are a lot of ON Semiconductor CAT853JTBI-T3 Voltage Supervisors applications.
- Precision measurement
- Battery-powered equipment
- Efficient information transmission
- Leakage protection
- Functional modules
- Embedded computing
- DVR
- Multi-voltage system
- Medical-specific insulation monitor
- Automotive permanent magnet synchronous motors
