CAT1026YI-25-GT3 Overview
A total of 8 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. This power managment ic consists of 2 channels, each of which can be used independently. In this PMIC, you can find 8-TSSOP (0.173, 4.40mm Width) functions for your reference. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. A supply voltage of 3V is used to conduct the PMIC chip. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. Power management has a total of 8 pins. 8 pins are on the supervisor. It is recommended that Vsup should not be less than -2V for this IC power. The supply voltage (Vsup) should not exceed 7V volts in this IC power. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. Supplied with a operating current of 10μA, this PMIC is capable of fully function as specified. It is always advisable to use CAT1026, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 3mA.
CAT1026YI-25-GT3 Features
Multi-Voltage Supervisor type
Minimum supply voltage of -2V
10μA operating supply current
CAT1026YI-25-GT3 Applications
There are a lot of ON Semiconductor CAT1026YI-25-GT3 Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Display equipment
- Radio
- Unattended substation automation
- Multi-voltage system
- Linux and server computing
- Radar
- DC stabilized power supply module
- Electronics installed in the vehicle
- Insulation fault location system
