MAX6379UR37+T Overview
There are 3 terminals connected to this power management, which makes it easy to mount. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. When 3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 3 pins on IC management. There are 3 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. In order to maintain a stable supply current for the power management, 1μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX6379, the base power ics number.
MAX6379UR37+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current
MAX6379UR37+T Applications
There are a lot of Maxim Integrated MAX6379UR37+T Voltage Supervisors applications.
- Battery cars
- Battery cars
- Embedded computing
- Personal computers
- Military electronics
- Radar
- Magnetic resonance imaging
- Network equipment
- emergency room
- Refrigeration
