CAT1320LI-30-G Overview
There are 8 terminals on this power management that allow it to be mounted. Power management is packaged in a Tube way. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Manage ics operate at 3.3V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts power management on the wall. In total, the power management has 8 pins in it. 8 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 3V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 3mA for the power management. As well as this, there are other features to mention such as [0], for example. For similar manage ics search of the manufacturer, you can always refer to CAT1320, the base PMIC number. The power management can work with a maximum supply temperature of 3mA.
CAT1320LI-30-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
3mA operating supply current
CAT1320LI-30-G Applications
There are a lot of ON Semiconductor CAT1320LI-30-G Voltage Supervisors applications.
- Efficient information transmission
- Low voltage/high power - AI, GPU
- Linux and server computing
- Dash board
- Radar
- DSP
- Power distribution systems of CCU
- Consumer electronics
- Insulation fault location system
- Fire equipment power monitoring system