74VCX16721MTDX Overview
In the form of 56-TFSOP (0.240, 6.10mm Width), it has been packaged. There is an embedded version in the package Tape & Reel (TR). As configured, the output uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 1.4V~3.6Vvolts. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74VCXseries of FPGAs. In order for it to function properly, its output frequency should not exceed 250MHz. A total of 1 elements are present. Despite external influences, it consumes 20μAof quiescent current. Members of the 74VCX16721family make up this object. A JK flip flop with a 6pFfarad input capacitance is used here. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 56. There is a clock edge trigger type of Positive Edgeon this device. It is designed with 20bits. The superior flexibility of this product is achieved by using 1 circuits. In order to operate, the chip has 20 output lines. It is reported that there are 2 input lines. The high level output current is set to -24mA. 24mA is the low level output current. Temperatures below 85°Care ideal for operating. It is recommended that the operating temperature be greater than -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 1.4VV. 3.6Vis its maximum supply voltage. 250MHzis the maximum frequency that can be achieved.
74VCX16721MTDX Features
Tape & Reel (TR) package
74VCX series
56 pins
20 Bits
74VCX16721MTDX Applications
There are a lot of ON Semiconductor 74VCX16721MTDX Flip Flops applications.
- Latch
- Latch-up performance
- Digital electronics systems
- Data Synchronizers
- ESD performance
- Memory
- Shift registers
- Patented noise
- Matched Rise and Fall
- High Performance Logic for test systems
