74LCX374MSA Overview
As a result, it is packaged as 20-SSOP (0.209, 5.30mm Width). The Tubepackage contains it. T flip flop uses Tri-State, Non-Invertedas the output. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 2V~3.6V volts, it operates. In this case, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74LCX series. Its output frequency should not exceed 150MHz Hz. A total of 1elements are present in it. There is 10μA quiescent consumption. 20terminations have occurred. The object belongs to the 74LCX374 family. The D flip flop is powered by a voltage of 2.5V . This T flip flop has a capacitance of 7pF farads at the input. Devices in the LVC/LCX/Zfamily are electronic devices. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. The flip flop is designed with 8bits. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. The superior flexibility of this circuit is achieved by using 8 circuits. There are 2 ports embedded in the flip flops. There are 3 output lines in this JK flip flop.
74LCX374MSA Features
Tube package
74LCX series
20 pins
8 Bits
74LCX374MSA Applications
There are a lot of ON Semiconductor 74LCX374MSA Flip Flops applications.
- ESD performance
- Automotive
- Single Down Count-Control Line
- Buffer registers
- Latch-up performance
- Digital electronics systems
- Buffered Clock
- Registers
- Computing
- Set-reset capability
