SN74LVC1G79QDCKRQ1 Overview
The flip flop is packaged in a case of 5-TSSOP, SC-70-5, SOT-353. The package Tape & Reel (TR)contains it. It is configured with Non-Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.65V~5.5V volts. In the operating environment, the temperature is -40°C~125°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the Automotive, AEC-Q100, 74LVCseries contain this type of chip. You should not exceed 160MHzin the output frequency of the device. A total of 1elements are contained within it. During its operation, it consumes 10μA quiescent energy. Terminations are 5. Members of the 74LVC1G79family make up this object. A voltage of 3.3V is used as the power supply for this D latch. Its input capacitance is 4pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. This board is designed with 5pins on it. The design is based on 1bits. As a result of its reliable performance, this T flip flop is suitable for TR.
SN74LVC1G79QDCKRQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
5 pins
1 Bits
SN74LVC1G79QDCKRQ1 Applications
There are a lot of Texas Instruments SN74LVC1G79QDCKRQ1 Flip Flops applications.
- Balanced 24 mA output drivers
- Shift registers
- Event Detectors
- Patented noise
- Bus hold
- EMI reduction circuitry
- Reduced system switching noise
- Buffer registers
- Consumer
- CMOS Process
