SN74LVC1G80YZPR Overview
As a result, it is packaged as 5-XFBGA, DSBGA. D flip flop is embedded in the Tape & Reel (TR) package. Currently, the output is configured to use Inverted. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. With a supply voltage of 1.65V~5.5V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. The 74LVCseries comprises this type of FPGA. Its output frequency should not exceed 160MHz Hz. 5terminations have occurred. Members of the 74LVC1G80family make up this object. The D flip flop is powered by a voltage of 1.8V . Its input capacitance is 3.5pFfarads. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. There is an electronic part mounted in the way of Surface Mount. 5pins are included in its design. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The design is based on 1bits. Its superior flexibility is attributed to its use of 1 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. The supply voltage should be maintained at 3.3V for high efficiency. As a result of its output current of 32mA, it is very flexible in terms of design. There is 10μA quiescent current consumption by it.
SN74LVC1G80YZPR Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
SN74LVC1G80YZPR Applications
There are a lot of Texas Instruments SN74LVC1G80YZPR Flip Flops applications.
- Storage Registers
- Communications
- Supports Live Insertion
- Balanced 24 mA output drivers
- Shift Registers
- Buffered Clock
- Shift registers
- Differential Individual
- Computing
- Latch
